(4) Slide the id of the light source unit to remove it (see Fig.5.4).
Note:
Do not loosen screws other than the adjustment screw for the stopper.
(5) Turn the deuterium lamp stopper adjustment screw (Fig. 5.5 or Fig. 5.6) and search for a
position where the value displayed on the monitor is a maximum.
(6) Replace the lid of the light source unit.
5.3.3 Consumable Parts
Table5.1 gives consumable parts necessary for maintenance. On any order, please quote the
part names and also the part numbers.
Part name
Halogen lamp (WI)
Deuterium lamp (D
)
2
Fuse (2.0 A Time-lag fuse)
Fuse (2.5 A Time-lag fuse)
Fuse (1.6 A Time-lag fuse)
Table 5.1 Consumable parts
Part number
5330-0099
5330-0094B
5840-H102A
5 fuses/set, V-630, 100 V
5840-H103A
5 fuses/set, V-650/660/670, 100 V
5840-H106A
5 fuses/set, V-630/650/660/670, 200 V
30
Description