Regulatory Statement - Jasco V-630 Hardware Manual

Regulatory Statement

CE Notice
The symbol indicates compliance of this JASCO system to the EMC (Electromagnetic
Compatibility) and Low Voltage Directives of the European Community. This symbol indicates
that this JASCO system meets the relevant basic safety and health requirements of the EC
Directive based on the following technical standards:
· EN61326-1: "Electrical equipment for measurement, control and laboratory use – EMC
requirements – Part 1: General requirements"
WARNING!:
This is a Class A product. In a domestic environment this product
may cause radio interference, in which case the user may be
required to take corrective measures.
· IEC61000-3-2: "Electromagnetic compatibility (EMC) Part 3-2: Limits – Limits for harmonic
current emissions (equipment input current up to and including 16A per phase) "
· IEC61010-1: "Safety requirements for electrical equipment for measurement, control and
laboratory use – Part 1: General requirements"
· A "Declaration of Conformity" in accordance with the above standards has been made and is
on file at JASCO CORPORATION, 2967-5 Ishikawa-machi, Hachioji-shi, Tokyo 192-8537,
JAPAN.
FCC Statement (for USA only)
Federal Communications Commission Radio Frequency Interference Statement
WARNING!:
This equipment generates, uses, and can radiate radio frequency
energy. If it is not installed and used in accordance with the
instruction
communications. It has been tested and found to comply with the
limits for a Class A computing device pursuant to Part 15 of FCC
Rules, which are designed to provide reasonable protection against
such interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause
interference, in which case the users at their own expense will be
required to take whatever measures may be required to correct the
interference.
manual, it may
vi
cause interference to radio