Names And Functions Of Components; V-630 Spectrophotometer; Overview - Jasco V-630 Hardware Manual

4 Names and Functions of Components

4.1 V-630 Spectrophotometer

4.1.1 Overview

Sample compartment
Fixing screws
Name
Sample compartment
Fixing screws
"Power" switch
"START" switch
Light source lid
Figure 4.1 V-630 appearance
Function
Slide the lid to the back to open it. The single position cell holder
(the standard cell holder) is installed. The cell holder located
toward the front is the sample cell holder, and the one located
toward the rear is the reference cell holder.
Fixes the standard cell holder in position. Loosen the two fixing
screws, pull the standard cell holder toward you a little and lift to
remove it.
When the switch is pressed on, the power supply is turned on.
Switch to start measurement. The lamp flashes during
measurement.
The light source is housed here.
17
Light source lid
"START" switch
"Power" switch