Generating A Server Certificate; Server Certificate Fields - Multitech FaxFinder FF240-IP Administrator's Manual

BASIC FAXFINDER CONFIGURATION
-----BEGIN PRIVATE KEY-----
.
.
-----END PRIVATE KEY----
-
-----BEGIN CERTIFICATE-----
.
.
-----END CERTIFICATE-----
.
-----BEGIN INTERMEDIATE CERTIFICATE-----
.
.
-----END INTERMEDIATE CERTIFICATE-----
To upload a certificate:
1. Click System Configuration > Certificates.
2. Click Upload.
3. Browse to your certificate.
4. Enter certificate information. Refer to
for identification purposes only.
5. Click Save. You will be prompted to reboot FaxFinder.
6. Reboot FaxFinder.

Generating a Server Certificate

Because FaxFinder uses a self-signed website certificate, your browser will show a certificate error and warning.
Ignore the warning or, depending on your browser, add an exception or add your FaxFinder IP address to your
trusted sites.
To generate a certificate:
1. Click System Configuration > Certificates.
2. Click Create.
3. Enter certificate information. Refer to
identification purposes only.
4. Click Generate. You will be prompted to reboot FaxFinder.
5. Reboot FaxFinder.

Server Certificate Fields

Unless otherwise specified in the table below, you can enter up to 64 characters in these fields.
Field
Common Name
Days
18
Description
Enter the hostname or IP address, depending on which you use to connect to FaxFinder.
The web browser uses this field to check for a valid certificate.
Enter up to three digits for number of days that the certificate is valid.
FaxFinder
Server Certificate Parameters
Server Certificate Fields
®
Fax Server FF240-IP, FF240, FF440, FF840 Administrator Guide
for details. The values you enter are
for details. The values you enter are for