Announcements; Language Change; Firmware Update/Changing The Display Language - GRAUPNER mc-32 HoTT Manual

Announcements

Language change

Firmware update/Changing the display language

33032_jp_V1
These messages are in German by default. These announce-
ments are summarized in a voice packet which is stored in a
transmitter-internal memory but they can be replaced by a voice
packet of a different language at any time.
On the included micro SD card are already available the follow-
ing languages: German, English, French, Dutch, Italian and
Spanish, Czech and Russian.
The recent language packets are available on www.graupner.de.
Language change step by step:
Insert the included memory card in its slot as described in the
"Memory card" section.
Switch the transmitter on with the RF module on.
Change in the "Hidden mode" menu.
Move to the line "ANNOUNCEMENT" by using the selection
keys.
Select the "ANNOUNCEMENT" option with the SET key.
Select the language with the selection keys.
Confirm by pressing the SET key. The selected language packet
will be stored in the transmitter memory.
The loading process is finished as soon as the progress bar at
the lower edge of the display disappears.
When this process is finished, switch the transmitter off.
Note
If the warning message "RF OFF OK", the RF module is still active.
Switch the RF module off and repeat the process.
If the data list is empty. the transmitter is not finding any valid lan-
guage data in the SD card. Verify the content of the "VoiceFile" folder
in the SD card by a PC.
Note
Before each update, check the transmitter battery charge or charge
it as a precaution, and save all model memories so that they can be
restored if necessary.
Note
Follow the "Firmware update step by step" manual steps from the
section "Firmware update" "Update per memory card".
29 / 36