Brake Spring And Ratchet; Control Sticks Centering Force; Brackets For Transmitter Belt - GRAUPNER mc-32 HoTT Manual

Brake spring and ratchet

Control sticks centering force

vertical
horizontal

Brackets for transmitter belt

33032_jp_V1
Locate the screws indicated by a white circle in the picture.
The outboard screw of the two marked in the figure adjust the
braking force.
The inboard screw adjusts the strength of the ratchet for the
respective control stick.
Note Note
The right control stick gimbal is specular to the left one, so that here
the screws are located left on the top side.
The control sticks' restoring force can also be adjusted. The
adjustment is located next to the return springs.
By turning the respective adjust screw the spring force can be
adjusted.
Right turn = return harder
Left turn = return softer
A stable transmitter hanger for fastening neck straps is standard
equipment on the mc-32 HoTT transmitter.
Installing the metal brackets:
Push both brackets inward a bit near where they are engraved.
Turn them upward by 90 °. The brackets will automatically lock
into position.
If you have a neck strap fastened to the holder bracket with key-
rings, first press lightly on the right holder bracket to release its
latch. So it can be folded down. Use the same procedure for the
left bracket.
Afterward push both brackets simultaneously into the recess.
21 / 36