Important Safety Instructions; Save These Instructions - Vertiv Liebert ITA2 User Manual

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety instructions about installing and operating the Liebert ITA2 MBC
(maintenance bypass cabinet). Read all safety, installation and operating instructions before beginning to install
or operate the Liebert ITA2 or the Liebert ITA2 MBC. Adhere to all warnings on the unit and in this manual. Follow
all operating and user instructions. Users must fully understand this equipment to install and operate it.
The Liebert ITA2 MBC is designed for commercial/industrial use only. It is not intended for use with life support
or other designated critical devices. Maximum load must not exceed that shown on the unit's rating label. Install
and operate the Liebert ITA2 MBC only in a clean indoor environment, free of conductive contaminants,
moisture, flammable liquids, gases and corrosive substances. The Liebert ITA2 MBC contains no
user-serviceable parts. Refer all faults to your local dealer, local Vertiv representative or Vertiv Services.
The Liebert ITA2 UPS system with Liebert ITA2 MBC is designed for use on a properly earthed (grounded),
208/220V AC supply. The system must be installed only by properly trained and qualified personnel. A qualified
electrician must review and approve customer-supplied wiring, circuit breakers and intended loads and verify
correct input, output and earth connections to ensure compliance with the technical standards and local
electrical codes.
WARNING
Risk of electrical shock and high short circuit current. Can cause injury or death.
The following precautions must be observed before replacing the battery pack:
• Wear rubber gloves and boots
• Remove rings, watches and other metal objects.
• Use tools with insulated handles.
• Do not lay tools or other metal objects on the batteries.
• If the battery kit is damaged in any way or shows signs of leakage, contact your local Vertiv
representative immediately.
• Do not dispose of batteries in a fire. The batteries may explode.
• Handle, transport and recycle batteries in accordance with local regulations.
WARNING
Risk of electrical shock, fire and high short circuit current. Can cause injury or death.
The Liebert ITA2 MBC has been designed and manufactured to ensure personal safety, but improper use
can result in electrical shock or fire. To ensure safety, observe the following precautions:
• Turn Off and unplug the Liebert ITA2 MBC before cleaning it.
• Clean the unit with a dry cloth. Do not use liquid or aerosol cleaners.
• Never block or insert any objects into the ventilation holes or other openings of the Liebert ITA2 MBC.
• Do not place the Liebert ITA2 MBC power cord where it might be damaged.
WARNING
Risk of exposure to hazardous chemical.
This product contains a chemical known to the State of California to cause cancer and birth defects or
other reproductive harm.
Vertiv | Liebert
® ™
ITA2 , 8-10kVA, 208/220V Three-Phase MBC User Manual | Rev. 0 | 02/18 | 1