Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dormakaba 2725-K6
Summary of Contents for Dormakaba 2725-K6
- Page 1 Technical Manual 08/2017...
- Page 2 No part of this document may be reproduced or used in any form or by any means without prior written permis- sion of dormakaba Schweiz AG. All names and logos of third-party products and services are the property of their respective owners.
-
Page 3: Table Of Contents
Master media 21 User media 21 Program structures 22 A/B and B structures 22 Programming user media with B masters 23 Deleting individual user media 24 Deleting individual B masters 25 Deleting all user media 26 08/2017 dormakaba c-lever compact... - Page 4 Connecting the programmer 32 Configuration and traceback 32 Troubleshooting 33 Error analysis 33 Disposal / dismantling 34 10.1 Decommissioning / dismantling 34 10.2 Disposal 34 Packaging/return 35 11.1 Complete devices 35 11.2 Electronic component assemblies 35 dormakaba c-lever compact 08/2017...
-
Page 5: About This Document
2724-K6 2725-K6 Article numbers and vari- ants: 2725-K6 c-lever compact, standard 2724-K6 c-lever compact, half This document describes all product versions and all optional features and functions. Options are subject to a charge and therefore only available if purchased. 1.3 Contents and purpose The contents of these instructions are limited to the installation, operation, maintenance and servicing of the product. - Page 6 About this document Technical Manual • User manual for programming and signals of the Kaba evolo components • System description Kaba evolo • Planning guideline wireless • Documentation for currently installed system software dormakaba c-lever compact 08/2017...
-
Page 7: Abbreviations/Definition Of Terms
Short designation Product designation c-lever c-lever compact evolo component c-lever compact Programmer Programmer 1460 S-module S-module for c-lever Kaba evolo Manager Multi RFID device Symbols Acoustic signal Visual signal 08/2017 dormakaba c-lever compact... -
Page 8: Hazard Categories
They help to make best use of the product and its functions. 1.8 Symbols Symbols with the following meanings are used for hazards (depending on hazard source.) General hazard Hazard from electric shock Risk of explosion Risk to electronic components from electrostatic discharge dormakaba c-lever compact 08/2017... -
Page 9: Basic Safety Instructions
Avoid contact between PCBs and clothing. The wrist strap protects PCBs against an elec- trostatic discharge voltage from the body only. However, damage can also be caused by an electrostatic discharge voltage from clothing. • Transport and ship dismantled modules in conductive anti-static bags only. 08/2017 dormakaba c-lever compact... -
Page 10: Handling Of Lithium Batteries
Pacemakers may be inadvertently switched to test mode, causing those who wear them to feel unwell. • People wearing such devices should maintain an appropriate distance from magnets. • People wearing such devices should be warned before approaching magnets. dormakaba c-lever compact 08/2017... -
Page 11: Product Description
Opening tool (optional) (2 pieces) Inside rosette ‘round’ (optional) Batteries, AAA lithium (2 pieces) Spindle (square pin) Guide ring Flexible support plate (increases M6 x 8 threaded pin (ISO 4029 / torque resistance) DIN 916) Sleeves Outside handle 08/2017 dormakaba c-lever compact... -
Page 12: Scope Of Delivery
Fitting Zinc housing H x W x D 122 x 54 x 23 Antenna cover Synthetic material Power supply Batteries 1.5 V, AAA lithium Ambient conditions Protection type IP54 Outside Temperature -25 °C – +70 °C The temperature range de- pends on the battery manu- facturer’s specifications. dormakaba c-lever compact 08/2017... - Page 13 According to test certificate Protection class EN 1906 class 0 Usage class EN 1906 class 3 Cycles Battery life at 20 °C > 60,000 cycles Depending on configuration Battery life at -20 °C Certification not yet complete 08/2017 dormakaba c-lever compact...
-
Page 14: Dimensions
54,7 23,0 ±50° 3.4.2 Conformity This product conforms to the EU directives 2014/53/EU Radio Equipment Directive 2014/35/EU LVD Directive 2011/65/EU RoHS Directive You can download the original declaration of conformity in PDF format at www.kaba.com/con- formity. dormakaba c-lever compact 08/2017... -
Page 15: Installation
Mark the drill holes on the outside and inside of the door. Remove the lock. Note: Do not drill through the door. Drill the holes up to the lock mortise. Clean the lock mortise. 5. Insert the lock. 08/2017 dormakaba c-lever compact... -
Page 16: Inserting The Battery Holder
The battery holder clicks into place. – The green light briefly illuminates once. 4.4 Additional torsion lock • Measure the drill hole diameter on the door. • Select suitable sleeves to bridge the gap. • Attach the sleeves. dormakaba c-lever compact 08/2017... -
Page 17: Securing The Battery Holder More Tightly
4.6 Mounting the outside lever handle Position the guide ring on the mechatronics unit. Attach the lever handle in the desired position on the square. Screw the M6 x 8 threaded pin (with threadlocker) into the lever handle and secure in place. 08/2017 dormakaba c-lever compact... -
Page 18: Mounting The Spindle
The lever handle can only be removed with a special tool after attaching it to the rosette. Attach the (optional) rosette with the plastic attachment (highlighted in blue) pointing down. Align the c-lever on the door. Screw the rosette securely in place. dormakaba c-lever compact 08/2017... -
Page 19: Removing The Protective Film
Switch off 'Bolt Recreation Time' in the system software and transfer to the device using the programmer. Refer to the documentation for currently installed system software. 'Bolt Recreation Time' defines the time interval at which the engaging state of the mechat- ronics unit should be checked. 08/2017 dormakaba c-lever compact... -
Page 20: Dismantling
If present: Remove the battery holder locking screw. Remove the flexible support plate. Unscrew the battery holder locking screw. 4.12.5 Removing the outside lever handle • Unscrew the threaded pin from the lever handle and remove the lever handle. dormakaba c-lever compact 08/2017... -
Page 21: Programming
Lost User media should be immediately blocked and deleted from all components. (Delete lost User media in the KEM system software in the whitelist (add CardLink to the blacklist) or delete all User media with the corresponding master and then re-program all User media). 08/2017 dormakaba c-lever compact... -
Page 22: Program Structures
B masters as required. For example, a B1 master only manages 50 users whilst another master, B2, manages up to 3950 users. 5.5 A/B and B structures A/B- structure Master A B- structure Master B User media dormakaba c-lever compact 08/2017... -
Page 23: Programming User Media With B Masters
1 x long Beeeep Master B approx. 1 shold in front of the antenna. Note: If no master medium is held up within 20 seconds, program- ming mode ends automatically and one long acoustic signal sounds. 08/2017 dormakaba c-lever compact... -
Page 24: Deleting Individual User Media
1 x long Beeeep Master B approx. 1 shold in front of the antenna. Note: If no master medium is held up within 20 seconds, program- ming mode ends automatically and one long acoustic signal sounds. dormakaba c-lever compact 08/2017... -
Page 25: Deleting Individual B Masters
1 x long Beeeep Master A approx. 1 s hold in front of the antenna. Note: If no master medium is held up within 20 seconds, program- ming mode ends automatically and one long acoustic signal sounds. 08/2017 dormakaba c-lever compact... -
Page 26: Deleting All User Media
Mas- 2 x short Beep ter B approx. 10 s Beep All User media under the Master B 1 x long are deleted. 1 x short 10 s Key: Firmware version 42xx dormakaba c-lever compact 08/2017... -
Page 27: Ini Reset With Master Media For Whitelist And Cardlink
INI reset with master Action B master 2 x short Beep Master B approx. 15 s hold in front Beep of the antenna. The INI reset will be executed after 15 s. 15 s 08/2017 dormakaba c-lever compact... - Page 28 Technical Manual INI reset with master Action Master A 2 x short Beep Master A approx. 15 s hold in front Beep of the antenna. The INI reset will be executed after 15 s. 15 s dormakaba c-lever compact 08/2017...
-
Page 29: Operation
Beep the acoustic signal will sound four times and the red light will Beep briefly flash four times. Beep Beep Key: If the function(s) have been activated using the programmer 1460 or the system soft- ware. 08/2017 dormakaba c-lever compact... -
Page 30: Maintenance
Only disinfection agents that are explicitly formulated for cleaning delicate metal surfaces and plastics may be used. The use of unsuitable cleaning agents or methods can damage the components' surface. Use a soft, damp cloth to clean the surface. dormakaba c-lever compact 08/2017... -
Page 31: Service
The clock settings are lost after 45 seconds. Also see about this 2 4.12.4 Removing the battery holder locking screw [} 20] 2 4.5 Securing the battery holder more tightly [} 17] 2 6 Operation [} 29] 08/2017 dormakaba c-lever compact... -
Page 32: Connecting The Programmer
Configuration, updates (e.g. of the clock time) and traceback read-outs are performed using the programmer. The traceback is transmitted from the programmer to the system software for evaluation. See also [} 1.4] > Programmer Also see about this 2 1.4 Supplementary documentation [} 5] dormakaba c-lever compact 08/2017... -
Page 33: Troubleshooting
Door is always open: Door — — – Time is missing on e-mod- – Set time, check program- does not open or close at ule or is not correctly set ming programmed time – Incorrect programming 08/2017 dormakaba c-lever compact... -
Page 34: Disposal / Dismantling
Disposal in Germany: dormakaba EAD GmbH will take responsibility for correct disposal of supplied goods once they are no longer in use as per statutory regulations (ElektroG in Germany). The owner of the used electrical appliance bears any costs incurred for transport to the manufacturer's plant. -
Page 35: Packaging/Return
Please observe the following instructions when sending dormakaba products. dormakaba is not liable for damage to products which is due to inadequate packaging. 11.1 Complete devices The original packaging is specially made for the device. It provides optimum protection against transport damage.
Need help?
Do you have a question about the 2725-K6 and is the answer not in the manual?
Questions and answers