Advertisement
EM1620
V01
EN
3
MOUNTING INSTRUCTIONS
Boltwork can be mounted on the bolt head if
required.
NEVER WELD ON BOLT OR BOLT EXTENSIONS!
Mount the entry unit following the separate
instruction.
Insert the star washer (provided with the large
handle) or the shaft guide washer depending on
which handle is used.
Insert the connector of the entry unit as shown in the outer position. Check that the connector is com-
pletely seated and locked by the black cable retainer. To remove the connector, use a small screwdriver
to push down the cable retainer. Tie cables away from moving parts and sharp corners.
For unplugging the connector lock has to be depressed . Connect a 9V alkaline Duracell , Energizer or
Duracell Industrial- battery to the battery clip to the keyboard ( or battery box ) , and check the lock
functions . Keep the Cable from sharp edges or moving Boltwork parts and set permanently .
www.m-locks.com
5
Advertisement
