Power System Installation
1.Place the"motor(D)"into the"ducted fan housing(C) " .
2.Attach the motor with 4"cup head screws(B)" .
3.Put the"rotor(E)"in the motor shaft.
(During this process,please note the hardware platform of rotor should be aligned with the motor shaft platform)
4.Use"spinner(F)"to cover the rotor,and lock it in place with "cup-head-screw(G)" .
5.Attach the"tail fan cowl(A)"to the bottom of "ducted fan housing(C)" and lock it in place with 2 "Grub screws(H)" .
G
F
E
HM 4x14
Step
1
I
k
F-104S Starfighter
Item No.:FJ310
D
Step
J
Step
3
Accessories name and specification
I -
J -
N
K -
L -
M-
N -
O-
not touch them by hand to avoid accidental injury.
When testing EDF, please use a safety test stand and
again, do not touch the unit!
C
2
L
M
EDF power system
Screws
(
PWA3x12mm 6pcs)
Fuselage
Screws
(PA3x8mm 4pcs)
Fan cover
Fin
Screws
(PA3x8mm 4pcs)
Note:When ESC and battery connected, do
EN
A
B
Hm3x8
H
M3x3
14
R