Maintenance; Clean The Exterior Of The Unit; Clean The Label Outlet - Brother QL-1110NWB User Manual

17

Maintenance

We recommend cleaning your Label Printer on a regular basis to maintain its correct performance.
Note
Always disconnect the AC Power Cord before cleaning the Label Printer.

Clean the Exterior of the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a cloth slightly damp with water on difficult to remove marks.
Note
Do not use paint thinner, benzene, alcohol or any other organic solvent.
These may deform or damage the Label Printer case.

Clean the Label Outlet

If a label causes the machine to jam due to adhesive residue attached to the label outlet, disconnect the AC
Power Cord from the machine and clean it with a cloth or cotton swab dipped in alcohol.
17
17
17
17
133