Brother QL-1110NWB User Manual page 22

Print Using a Computer (P-touch Editor)
WPS (Wi-Fi Protected Setup™)
If your Wi-Fi access point/router supports WPS, settings and connections can be configured quickly.
a
First, confirm that your Wi-Fi access point/router has the WPS symbol.
b
Place the Label Printer within the range of your Wi-Fi access point/router. The range may differ
depending on your environment. See the instructions provided with your Wi-Fi access point/router.
c
Press the WPS Button on the Label Printer.
When the connection is established, The Wi-Fi LED is lit green.
Note
• Computers that are on the same network as the Label Printer will have access to the Label Printer.
• The Label Printer will try to connect using WPS for two minutes. If the WPS Button is pressed during that
time, the Label Printer will continue trying to connect for an additional two minutes.
2
2
13