Brother QL-1110NWB User Manual page 99

How to Use P-touch Editor Lite LAN (Windows
2 Properties Toolbar
Icon
Click
Click
You can adjust the font size up or down one level by clicking
Specifies the font style:
/
Specifies the alignment of text in a text box.
Sets the width of the label. Click
Sets the length of the label. Click
accommodate the entered text.
Changes the label direction to vertical.
Click
You can also change the zoom factor by clicking
Click
Print Options...: Auto Cut, Cut at end, Copies
Auto Cut: Each label is automatically cut after printing.
Cut at end: Cuts labels after the last label is printed.
Copies: Prints multiple copies of a label.
Printer Setup...: Displays a list of the connected Label Printers.
Note
• If multiple Label Printers are connected to the network, select the Label Printer to print with. A list of the
Label Printers connected to the network can be displayed by clicking
You can find the Label Printer you want in the list from its IP address.
• The IP address of Label Printers can be checked by printing the Label Printer set-up information. Press
and hold the Cutter (
• We recommend that you set the Label Printer location using BRAdmin because it enables you to view the
Label Printer in the list.
®
only)
to change the font.
to specify the font size.
/ Bold / Italic
/ Underline
to set the zoom factor for the Label View.
to print normally or
) Button when the power is on to print the Label Printer set-up information.
Function
to automatically detect the width of the inserted label.
to automatically adjust the length of the label to
or .
to print with options.
and then clicking Printer Setup....
or .
9
90