Table of Contents
Advertisement
Your P-touch labeling system should be cleaned on a regular basis to maintain its
performance and life span.
Always remove the batteries and disconnect the AC adapter before cleaning the P-touch labeling
system.
Cleaning the Unit
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
Do not use paint thinner, benzene, alcohol or any other organic solvent. These may deform the
case or damage the appearance of your P-touch labeling system.
Cleaning the Print Head
Streaks or poor quality characters on printed labels generally
indicates that the print head is dirty. Clean the print head using a
cotton swab or the optional print head cleaning cassette (TZe-CL4).
• Do not touch the print head directly with your bare hands.
• Refer to the instructions provided with the print head cleaning
cassette for directions on how to use it.
Cleaning the Tape Cutter
Tape adhesive can build up on the cutter blade after repeated use,
damaging the blade which may result in the tape jamming in the
cutter.
• About once every year, wipe the cutter blade using a cotton swab
moistened with isopropyl alcohol (rubbing alcohol).
• Do not touch the cutter blade directly with your bare hands.
Maintenance
Print head
Maintenance
1
2
3
4
5
6
7
8
9
46
Advertisement
Table of Contents
