Resetting & Maintaining Your P-Touch Labeler; Resetting The P-Touch Labeler; Resetting The Data To Factory Settings; Maintenance - Brother TZe P-Touch PT-D400VP User Manual

RESETTING & MAINTAINING YOUR P-TOUCH LABELER

Resetting the P-touch Labeler

Resetting the data to factory settings

Turn off the machine. Press and hold down (
down ( ) and (
NOTE
• Release (
• All text, format settings, option settings and stored label files are
cleared when you reset the P-touch labeler. Language and unit
settings will also be cleared.

Maintenance

NOTE
Always remove the batteries and disconnect the AC adapter before
cleaning the P-touch labeler.

Cleaning the Unit

Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
NOTE
Do not use paint thinner, benzene, alcohol or any other organic solvent. These
may deform the case or damage the appearance of your P-touch labeler.

Cleaning the Print Head

Streaks or poor quality characters on printed labels
generally indicates that the print head is dirty.
Clean the print head using a cotton swab or the
optional print head cleaning cassette (TZe-CL4).
NOTE
• Do not touch the print head directly with your
bare hands.
• Refer to the instructions provided with the print
head cleaning cassette for directions on how to
use it.
26
Resetting the P-touch Labeler
), press ( ) once and then release (
) before releasing the other key.
) and ( ). While holding
) and (
Print head
).