Use The Mass Storage Mode - Brother QL-1110NWB User Manual

Other Functions

Use the Mass Storage Mode

a
Confirm that the Label Printer is turned off.
b
Press and hold the Wi-Fi ( ) Button and the Power ( ) Button at the same time for several seconds.
The Label Printer starts up in mass storage mode, the Status LED lights in green.
c
Connect the computer or device to the Label Printer via USB.
The Label Printer's mass storage area appears as a folder on the computer or device's screen.
Note
If the mass storage area does not appear automatically, refer to the operating instructions for the computer
or device's operating system for information about accessing the mass storage area.
d
Drag and drop the file you want to copy to the mass storage area.
e
Press the WPS Button.
The commands in the command file are executed, and the Status LED flashes once.
When finished, the Status LED lights in green.
f
To turn mass storage mode off, turn off the Label Printer.
IMPORTANT
• When the Label Printer is turned off, mass storage mode is deactivated and any files in the mass storage
area are deleted.
• This feature supports .bin, and .blf files. Other file formats are not supported.
• Do not create folders in the mass storage area. If a folder is created, files in the folder cannot be accessed.
• The capacity of the mass storage area is 2.5 MB. Files larger than 2 MB may not work correctly.
• If multiple files are copied, the order that the commands will be executed cannot be guaranteed.
• Wired LAN, Bluetooth and Wi-Fi are not available while the Label Printer is running in mass storage mode.
• Do not access other files in the mass storage area when executing a copied file.
Note
For more information on how to create a .blf file, see Create Transfer Files and Transfer Package Files
on page 103.
6
6
71