Brother QL-1110NWB User Manual page 41

Change the Label Printer Settings
You can specify settings only when LEAP, EAP-FAST, PEAP, EAP-TTLS or EAP-TLS is selected as the
authentication method. In addition, with EAP-TLS, it is not necessary to register a password, but a client
certificate must be registered. To register a certificate, connect to the Label Printer from a web browser,
and then specify the certificate. For more information on using a web browser, see Web Based
Management on page 129.
• Display the key and password on-screen
If this check box is selected, keys and passwords are displayed in plain (non-encrypted) text.
Communication Modes and Authentication Methods/Encryption Modes
 When Communication Mode is set to Ad-hoc
Authentication Method
Open System
 When Communication Mode is set to Infrastructure
Authentication Method
Open System
Shared Key
WPA/WPA2-PSK
LEAP
EAP-FAST/NONE
EAP-FAST/MS-CHAPv2
EAP-FAST/GTC
PEAP/MS-CHAPv2
PEAP/GTC
EAP-TTLS/CHAP
EAP-TTLS/MS-CHAP
EAP-TTLS/MS-CHAPv2
EAP-TTLS/PAP
EAP-TLS
IMPORTANT
To specify higher level security settings:
When performing certificate verification with EAP-FAST, PEAP, EAP-TTLS or EAP-TLS authentication
methods, the certificate cannot be specified from the Printer Setting Tool. After the Label Printer is
configured to connect to the network, specify the certificate by accessing the Label Printer from a web
browser.
For more information on using a web browser, see Web Based Management on page 129.
Encryption Mode
None / WEP
Encryption Mode
None / WEP
WEP
TKIP+AES / AES
CKIP
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
TKIP+AES / AES
4 4
32