Table of Contents
Advertisement
3.
The rear mounting brackets are secured to the rack with M6 screws, washers, and clip nuts. Torque
the screws to approximately 30 inch-pounds (3.5 Nm).
Figure 12
4.
The front mounting brackets and the rear mounting brackets are secured with M3 screws. Torque
the screws to approximately 4 inch-pounds (0.5 Nm).
Figure 13
Attaching Rear Mounting Brackets
Securing the Rear Bracket to the Front Bracket
Installing the RackSwitch G8124
31
Advertisement
Table of Contents
