Installing The Rackswitch G8124 In A 4-Post Rack - IBM BNT RackSwitch G8124R Installation Manual

Installing the RackSwitch G8124 in a
4-post Rack
This section provides general information about installing the RackSwitch G8124 in a 4-post rack,
including the IBM e1350 - Type 1410. For information about mounting the G8124 in other rack
types, refer to the following sections:
"Installing the RackSwitch G8124 in a Standard Equipment Rack" on page 23
"Installing the RackSwitch G8124 in an iDataPlex Rack" on page 26
The 4-post mounting kit is ordered separately. The following table lists the parts included in the
standard 4-post mounting kit.
Table 13 4-Post Rack Mount Kit
Item number Description
1 M6 clip nuts
2 M6 locking washers
3 M4 screws
4 M6 screws
5 M6 cage nuts
6 M3 screws
7 Front bracket
8 Rear bracket
The e1350 -Type 1410 mounting kit is ordered separately. The following table lists the parts
included in the mounting kit.
Table 14 Type 1410 Rack Mount Kit
Item number Description
1 Left bracket
2 Right bracket
3 Filler plate
4 M6 screws
4 M6 locking washers
4 M6 clip nuts
5 M4 screws
Quantity
8
8
16
8
8
4
2
2
Quantity
1
1
1
12
12
8
16
Installing the RackSwitch G8124 29