Table of Contents
Advertisement
The IBM Documentation CD
The IBM Documentation CD contains documentation for your switch in Portable Document Format
(PDF) and includes the IBM Documentation Browser to help you find information quickly.
Hardware and Software Requirements
The IBM Documentation CD requires the following minimum hardware and software:
Microsoft Windows NT 4.0 (with Service Pack 3 or later), Windows 2000, or Red Hat® Linux.
100 MHz microprocessor.
32 MB of RAM.
Adobe Acrobat Reader 3.0 (or later) or xpdf, which comes with Linux operating systems.
Acrobat Reader software is included on the CD, and you can install it when you run the
Documentation Browser.
Using the Documentation Browser
Use the Documentation Browser to browse the contents of the CD, read brief descriptions of the
documents, and view documents, using Adobe Acrobat Reader or xpdf. The Documentation
Browser automatically detects the regional settings in use in your computer and displays the
documents in the language for that region (if available). If a document is not available in the
language for that region, the English-language version is displayed.
Use one of the following procedures to start the Documentation Browser:
If Autostart is enabled, insert the CD into the CD drive. The Documentation Browser starts
automatically.
If Autostart is disabled or is not enabled for all users, use one of the following procedures:
2
BNT RackSwitch G8124 Installation Guide
If you are using a Windows operating system, insert the CD into the CD drive and click
Start --> Run. In the Open field, type
e:\win32.bat
where e is the drive letter of the CD drive, and click OK.
If you are using Red Hat Linux, insert the CD into the CD drive; then, run the following
command from the /mnt/cdrom directory:
sh runlinux.sh
Advertisement
Table of Contents
