Registering The Phone - Polycom SOUNDPOINT IP 33X User Manual

User Guide for the SoundPoint IP 32x/33x Desktop Phone

Registering the Phone

1 - 8
To attach the base as a wall mount:
1. Place all cords in the recessed area below the modular jacks.
2. On the back of the phone, remove the key located behind the hook switch
and reposition it so that the end tab (at a 45
3. Using wall anchors (not included), fasten the base stand with the
mounting tab facing up.
4. Align the base stand tabs with their corresponding insertion points on the
phone, and then snap the phone into place (as shown).
Generally, your phone will be deployed with multiple other phones. In this
case, your system administrator will configure the phone parameters
beforehand, so that after you set up your phone, the phone will be registered
and ready to use.
0 angle) is facing up.