Assembly - Woodstock Shopfox W1766 Owner's Manual

Assembly

To correctly position this power feeder on your table top,
first gather the stand parts shown in Figure 5 and
assemble the power feeder stand (refer to the parts
diagram for any intricate details). Next, connect the stand
to the power feeder as shown in Figure 6, and then refer
to Base Mounting on Page 14. With your power feeder
unit completely assembled, it will be easier for you to
determine where on the table top to drill your base
mounting holes, so you can take advantage of the full
range of power feeder swing and adjustments.
You MUST assemble all guards, fences, and holdowns
before starting your machine or power feeder.
Failure to heed this warning could result in serious
personal injury.
Figure 5. Item layout.
Figure 6. Assembled power feeder.
-12-
W1766 ⁄ HP Power Feeder
1
2