Setup; Unpacking; Inventory - Woodstock Shopfox W1766 Owner's Manual

Unpacking

This machine has been carefully packaged for safe
transportation. If you notice the machine has been
damaged during shipping, please contact your authorized
Shop Fox dealer immediately.

Inventory

The following is a description of the main components
shipped with the Model W1766. Lay the components out
to inventory them.
Note: If you can't find an item on this list, check the
mounting location on the machine or examine the
packaging materials carefully. Occasionally we pre-install
certain components for safer shipping.
Box Inventory (Figures 3 & 4)
A. Power Feeder Assembly ..................................1
B. Extra 26 and 34-Tooth Gears (Behind Cover) .....1 Ea
C. Elbow Joint Assembly .....................................1
D. Base and Column Assembly ..............................1
E. Horizontal Crank and Leadscrew Assembly ............1
F. Base Bolt Pattern Template ..............................1
G. Pointed Set Screws M8-1.25 x 12 .......................3
H. Hex Wrench 4mm ..........................................1
I. Handwheel Handles .......................................2
J. Flat Washer 13mm.........................................1
K. T-Handle ....................................................1
L. Horizontal Column Assembly .............................1

SETUP

Keep machine disconnected from
power until instructed otherwise.
Qty
F
-10-
W1766 ⁄ HP Power Feeder
1
2
B
A
C
Figure 3. Inventory.
D
E
G
H
I
J
L
Figure 4. Inventory.
K