Table of Contents
Advertisement
Ô Ô Ô Ô Ô
These drivers are designed to work with Microsonft
1. Install WindowsÔ NT3.51 as you normally would for a VGA
display. Run WindowsÔ NT Control Panel from the Main Group.
Choose the Display option. In the Display Settings dialog box,
click on Change Display Type. Click on Change from the
Adapter Type in the Display Type dialog box. Click on Other in
the Sleect Device dialog box.
2. Place the WindowsÔ NT Display Driver Diskette in drive A .
Type A:\ Winnt3.5 and press<ENTER>. Select the adapter "Chips
and Tech 65554PCI" and click OK.
Click on Install to install the selected driver. Once the installa-
tion is complete, shutdown and restart the system.
Ò
WindowsÔ.
Advertisement
Table of Contents
