Aaeon SBC-555 Manual page 65

Ô Ô Ô Ô Ô
These drivers are designed to work with Microsoft Windows Version
3.1. You should install these drivers through Windows.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
2. Place the Windows 3.1 Display Driver in drive A. In Windows
Program Manager, choose File from the Options Menu. Then
from the pull-down menu, choose Run. At the Command Line
prompt, type A:\SETUP. Press the <ENTER> key or click OK to
begin the installation.
At this point the setup program locates the directory where Windows
is installed. For proper operation, the drivers must be installed
in the Windows subdirectory.
3. Press <ENTER> to complete the installation. Once completed,
you can find the icon Chips CPL under the Control Panel. The
icon Panel allows you to select and load the installed drivers.
Another method of installing these drivers is through the File
Manager. Click on Drive A:, and then double-click on
WINSETUP.EXE to begin installation.