Table of Contents
Advertisement
ENTER PASSWORD:
Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously
entered pssword from CMOS memory. You will be asked to
confirm the password. Type the password again and press
<Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted
to enter the password. a message will confirm the password will
be disabled. Once the password is disabled, the system will boot
and you can enter Setup freely.
PASSWORD
When a password has been enabled, you will be prompted to enter
it every time you try to enter Setup. This prevents an unau-
thouized. The would prevent unauthouized use of your computer.
Advertisement
Table of Contents
