Os/2 - Aaeon SBC-555 Manual

Ô Ô Ô Ô Ô
These drivers are designed to work with Microsonft
You just install these drivers through the WindowsÔ operating
system.
1. Install WindowsÔ 95 as you normally would for a VGA
display. Click the Start button, go to Settings and click on
Control Panel. Choose the Display icon and double click on
the icon. In the Display Properties window, click on Change
Display type. In the Change Display Type window, click on
the Change button under Adapter Type. This will bring up the
Select Device window.
2. Place the WindowsÔ 95 Display Driver Diskette in drive A. In
the Select Device window, click on Have Disk, Select Browse,
and find the Win95 driver "chips95.inf" in the drive A:\win95, and
then click OK. The name of the Chips And Technologies Inc.
Video Controller driver will appear highlighted in the Models list
box. Select Chips and Tech. 65554 PCI(new) and Click OK.
Click OK to start the driver installation.
3. Once the installation is complete, the Change Display Type
window will reappear. Click on Close to close the window. Then
the Display Properties window will reappear. Click on Apply.
Restart the system for new settings to take effect.
Ò
WindowsÔ.