Triax 492055 User Manual page 21

Rev. 01 - 2012 - C
RF level correc-
tion
Symbol rate
QAM mode
TDX Service Tool
To select services from an input module, click the Serv-
ices... button next to Select input field to open the Se-
lect input modules window.
To select an input module, click the check box (square)
to the right of the module you want to use.
If you want to give your selection a name, enter the
name in the Mux name field.
Click OK to return to the Configuration window.
Note
There is a limit to the number of services an
output module is able to output. You can con-
sult the TDX Web Configurator to avoid over-
loading the output module, i.e. select more
services than the module in question is able
to handle.
Next you select or enter values in the other fields in the
Configuration window.
To select another RF level correction, open the drop-
down list with the levels you can choose from.
Select the level you want to use.
Enter the desired symbol rate (from 3500 to 7200 kS) in
the Symbol rate field.
To select which QAM mode to use, open the drop-
down list with the channels you can choose from.
Select the QAM mode you want to use.
21