Triax 492055 User Manual page 18

TDX Service Tool
Rev. 01 - 2012 - C
Channel, Frequen-
cy and Channel
spacing
Select input
You have two possibilities when you configure a QAM
module:
• You can use the specifications of the channel plan
or
• You can enter a frequency manually.
Using the channel plans:
To select the required channel, open the drop-down list
with the channels you can choose from.
Select the channel you want to use.
When you have selected a channel the Frequency and
Channel spacing fields are automatically filled in.
Enter a frequency manually:
To be able to enter a frequency manually, open the
drop-down list with the channels you can choose from.
Select "Frequency" from the drop-down list.
Enter the desired frequency in kHz in the Frequency
field.
To select the required channel spacing, open the drop-
down list with the channel spacings you can choose
from.
Select the channel spacing you want to use.
Note
When you have selected a channel using the
channel plan or entered a frequency manually
then you have also set up the other three RF
channels on the module in question. You only
need to select services for each of the three
other RF channels, or disable one or more of
the three channels.
You have two possibilities when you select services:
• You can select services from the TDX-pool
or
• You can select services from a particular input mod-
ule.
Services from the TDX-pool
To select services from the TDX-pool, open the drop-
down list.
Select "Services" from the drop-down list.
To select services, click the Services... button next to
Select input field to open the Select services window.
18