Troubleshooting - KitchenAid 5KCG0702 User Manual

TROUBLESHOOTING

If your Burr Grinder should malfunction or fail to operate during use, please check
the following:
- Is the Burr Grinder plugged in? Check to
see if the Burr Grinder is plugged into a
grounded outlet. If it is, unplug the Burr
Grinder, then plug it into the same outlet
again. If it still does not work, check the
fuse or circuit breaker on the electrical
circuit the Burr Grinder is connected
to and make sure the circuit is closed.
If it does not run after taking these
steps, a foreign object may be jamming
the cutting burrs. Refer to "Care and
cleaning" section for detailed information
on cleaning the cutting burrs.
12 | TROUBLESHOOTING
- If the Burr Grinder runs when switched
on, but coffee does not grind: The burrs
require cleaning or are worn. Refer
to "Care and cleaning" section for
detailed information on cleaning
the cutting burrs.
- If the Burr Grinder is operating normally,
but stops abruptly: Immediately turn
off the Burr Grinder. A coffee bean,
may have jammed the cutting burrs.
Refer to "Care and cleaning" section
for detailed information on cleaning
the cutting burrs.
- If the grind is too coarse, or the Burr
Grinder isn't producing an acceptable
range of grinds: Refer to the "Adjusting
the burrs for a finer or coarser grind"
section for more information.
If the problem is not due to one of
the above items, see your warranty.
Do not return the Burr Grinder to the
retailer, as they do not provide service.