Troubleshooting - KitchenAid Pro Line KPCG100 Owner's Manual

Pro line series burr coffee mill
Hide thumbs Also See for Pro Line KPCG100:
Table of Contents

Advertisement

TROUBLESHOOTING

If the mill does not run when switched on:
Check to see if the mill is plugged into a grounded 3 prong outlet. If it is, unplug
the mill, then plug it back in again. If the grinder still does not work, check the
fuse or circuit breaker on the electrical circuit the mill is connected to and make
sure the circuit is closed. If the mill does not run after taking these steps, a foreign
object may be jamming the cutting burrs. See "Cleaning the Cutting Burrs" on
page 25 for more information.
If the mill runs when switched on, but coffee does not grind:
The cutting burrs require cleaning or are worn. See "Cleaning the Cutting Burrs"
on page 25 or "Replacing the Cutting Burrs" on page 29 for more information.
If the mill is operating normally, but stops abruptly:
Immediately turn off the grinder. A foreign object, such as a pebble or twig,
may have jammed the cutting burrs. See "Cleaning the Cutting Burrs" on
page 25 for more information.
If the grind is too coarse, or the mill isn't producing an acceptable
range of grinds:
See "Adjusting the Cutting Burrs" on page 16 or "Replacing the Cutting Burrs"
on page 29 for more information.
If the problem cannot be fixed with the steps above, see the KitchenAid Warranty
and Service section on the following page.*
*Do not return the coffee mill to the retailer. Retailers do not provide service.
30

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

This manual is also suitable for:

Kpcg100ob

Table of Contents