Troubleshooting - KitchenAid 5KCG0702C Owner's Manual

TROUBLESHOOTING

If your Burr Grinder should malfunction or fail to operate during use, please check
the following:
Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
- Is the Burr Grinder plugged in? Check to
see if the Burr Grinder is plugged into
an earthed outlet� If it is, unplug the Burr
Grinder, then plug it into the same outlet
again� If it still does not work, check the
fuse or circuit breaker on the electrical
circuit the Burr Grinder is connected to
and make sure the circuit is closed� If it
does not run after taking these steps,
a foreign object may be jamming the
cutting burrs� Refer to the "Care and
cleaning" section for detailed information
on cleaning the cutting burrs�
12 | TROUBLESHOOTING
W11048744B.indb 12
- If the Burr Grinder runs when switched
on, but coffee does not grind: The burrs
require cleaning or are worn� Refer
to the "Care and cleaning" section for
detailed information on cleaning
the cutting burrs�
- If the Burr Grinder is operating normally,
but stops abruptly: Immediately turn
off the Burr Grinder� A coffee bean
may have jammed the cutting burrs�
Refer to the "Care and cleaning" section
for detailed information on cleaning
the cutting burrs�
- If the grind is too coarse, or the Burr
Grinder isn't producing an acceptable
range of grinds: Refer to the "Adjusting
the burrs for a finer or coarser grind"
section for more information�
10/22/2018 1:45:34 PM