KitchenAid 5KCG0702 User Manual page 9

USING THE BURR GRINDER
ADJUSTING THE BURRS FOR A FINER OR COARSER GRIND
If you're an espresso or French Press aficionado, you may wish to adjust the factory
setting of the cutting burrs to provide optimum performance for your style of brewing.
Make sure the bean hopper is
empty; then, flip the POWER switch
1
up to turn on and run for a few
seconds to clear any debris.
Using a 4 mm allen wrench or a hex-
head screwdriver, remove the screw
from the front of the grind control
3
dial by turning it counterclockwise.
You will be able to see the grind
control gear after the dial is
removed.
For maximum grind fineness: Turn
the grind control dial to level 8.
2
For maximum grind coarseness:
Turn the grind control dial to level 1.
For maximum grind fineness: Flip
the POWER switch up to turn on
the Burr Grinder.
4
For maximum grind coarseness:
You do not need to turn the Burr
Grinder on while adjusting the burrs.
NOTE: If you cannot get the exact
maximum coarseness of grind you prefer
by adjusting the Burr Grinder while it is
off, try adjusting with the Burr Grinder
turned on.
USING THE BURR GRINDER | 9