KitchenAid KCG8433 - Coffee Grinder Manual

KitchenAid KCG8433 - Coffee Grinder Manual

Also See for KCG8433:

Advertisement

KitchenAid KCG8433 - Coffee Grinder Manual

PARTS AND FEATURES

PARTS AND FEATURES

NOTE: The Top hopper holds a maximum of 12 oz (340 g) of coffee beans.

  1. Top hopper lid
  2. Top hopper
  3. Grind size knob
  4. Dose selection knob
  5. Time adjustment knob
  6. Bottom hopper
  7. Bottom hopper lid
  8. Rubber stopper
  9. Portafilter holder guide
  10. Grounds catcher tray
  11. Portafilter holder
  12. Grind size indicator
  13. Dose selection indicator
  14. Grind time indicator
  15. Start/Stop button
  16. Program button

PRODUCT OVERVIEW

Your Burr Grinder has 70 unique grind size settings that are suitable for a range of brewing methods, from the finest setting for espresso to the coarsest setting for french press.

By adjusting the Dose selection knob, you can choose from 1 to 2 shots of espresso or 1 to 12 cups of coffee.

COFFEE GRIND SETTING CHART

Coffee Type French Press Perc (Percolation) Drip coffee Espresso
Grind Size Coarse Medium Coarse Medium Fine
Grind Size Range 1 - 24 25 - 35 36 - 54 55 - 70
Dose Selection 1 - 12 cups 1 - 12 cups 1 - 12 cups 1-2 shots
Use setting with Bottom hopper Bottom hopper Bottom hopper Portafilter holder

PRODUCT ASSEMBLY

First, clean all parts and accessories. (See "Care and Cleaning" section). Place the product on a dry, flat, level surface such as a countertop or table.

  1. Place the Top hopper onto the machine with the 'Lock icon' facing front. Rotate the Top hopper until it clicks into place.
    Add whole coffee beans. Place the Top hopper lid onto the Top hopper.
    PRODUCT ASSEMBLY - Step 1
  2. For grinding into the Bottom hopper:
    Open the Rubber stopper and slide the Bottom hopper into position.
    PRODUCT ASSEMBLY - Step 2
  3. For grinding into a Portafilter:
    Remove the Grounds catcher tray and then remove the Portafilter holder from its storage location. Insert Portafilter holder into Portafilter holder guide.
    Replace the Grounds catcher tray.
    PRODUCT ASSEMBLY - Step 3
  4. For grinding into the Portafilter:
    If using a standard residential Portafilter (54 mm), insert it along the top guides of the Portafilter holder.
    PRODUCT ASSEMBLY - Step 4
  5. For grinding into the Portafilter:
    If using a commercial Portafilter (58 mm), insert it
    into the middle guides of Portafilter holder.
    PRODUCT ASSEMBLY - Step 5

PRODUCT USAGE

  1. Select Grind Size:
    Refer to the Brew method icons on the machine. Rotate the Grind size knob to select a grind size within the brew method range you are using. The selected grind size will be shown on the display.
    NOTE: As grind size number increases the actual grind size decreases (1 is Coarse and 70 is fine).
    PRODUCT USAGE - Step 1
  2. Select Coffee Dose:
    Rotate the Dose selection knob for the number of cups or shots.
    French press, Perc, Drip coffee: Select between 1 - 12 cups.
    Espresso: Select between 1 - 2 shots.
    PRODUCT USAGE - Step 2
  3. To start grinding:
    Press Start/Stop to begin grinding.
    Grinder will stop automatically when the time reaches 0 on the display.
    PRODUCT USAGE - Step 3
  4. To pause during grinding:
    Press Start/Stop. To resume grinding press Start/Stop.
    NOTE: Grinder can remain paused for up to 15 seconds. After 15 seconds, the cycle will cancel and display will show the current selection.
    PRODUCT USAGE - Step 4
  5. To cancel the grinding cycle:
    Press and hold Start/Stop for 3 seconds.
    TIP: If Grind size knob is hard to rotate, run the machine while adjusting the size to remove any coffee grounds caught between the burrs.
    PRODUCT USAGE - Step 5
  6. To change coffee amount for a dose:
    If desired, rotate the Time adjustment knob to customize the desired amount of coffee for a particular selected dose. Increase the grinding time to increase the coffee ground amount or decrease the grinding time to decrease the coffee ground amount.
    PRODUCT USAGE - Step 6

PROGRAM FUNCTION

The Burr Grinder is equipped with programming functionality. This functionality allows you to save customized doses for each brew methods, based on grinding time.


To save dose setting: Once you have identified a desired dose time, press Program button to save the grind time you have selected.

Once a new grind time for a dose within a brew method is saved, the Burr Grinder will automatically adjust the grind time up or down for all other doses within the brew method accordingly.

NOTE: To restore all factory dose settings, press and hold the Program button for 3 seconds.

MICRO-ADJUSTING THE CONICAL BURRS

The Burr Grinder is equipped with an adjustable Upper burr. Making adjustments to this Burr expands the grind size range, allowing you to customize even further to meet your taste preference.

  1. Twist and lift the Top hopper to remove.
    Twist the bottom lock to empty the Top hopper into another container.
    MICRO-ADJUSTING THE CONICAL BURRS - Step 1
  2. Replace the empty Top hopper with Lid and twist to lock in place. Press Start/Stop to run the grinder until empty.
    MICRO-ADJUSTING THE CONICAL BURRS - Step 2
  3. Unplug the Burr Grinder. Remove the Top hopper and discard of any remaining coffee beans in the machine.
    Lift the Wire handle of the Upper burr. Twist to unlock and lift the Upper burr by using the Wire handle.
    MICRO-ADJUSTING THE CONICAL BURRS - Step 3
  4. Lift the Upper burr micro adjustment latch. Then, rotate the Upper burr to desired setting and engage adjustment latch back into position.
    MICRO-ADJUSTING THE CONICAL BURRS - Step 4
  5. Return the Upper burr to the machine and twist to lock into position.
    Reattach the Top hopper.
    MICRO-ADJUSTING THE CONICAL BURRS - Step 5

CARE AND CLEANING

CLEANING THE BURRS

  1. Twist and lift the Top hopper to remove.
    Twist the bottom lock to empty the Top hopper into another container.
    CLEANING THE BURRS - Step 1
  2. Replace the empty Top hopper with Lid and twist to lock in place.
    Press Start/Stop to run the grinder until empty. Then, unplug the burr grinder.
    CLEANING THE BURRS - Step 2
  3. Remove the Top hopper, locate the wire handle on the Upper burr, rotate and lift the handle to remove Upper burr.
    CLEANING THE BURRS - Step 3
  4. Clean the Upper burr with the cleaning brush. Clean the Lower burr with a brush or use a vacuum cleaner to remove coffee residue.
    CLEANING THE BURRS - Step 4
  5. Align the Upper burr back in place and twist clockwise to secure.
    Replace the Top hopper and the Lid.
    CLEANING THE BURRS - Step 5


To avoid damage, never wash or immerse the main body of Burr Grinder, burrs, or power cord in water, or place in the dishwasher.

  1. The Top hopper, Top hopper lid, Bottom hopper, Bottom hopper lid, Grounds catcher tray, and Portafilter holder can be cleaned with warm, soapy water, then rinse with clean water and dry with clean soft cloth.
    CARE AND CLEANING - Step 1
  2. Wipe clean the main body of Burr Grinder with a soft, damp cloth. Dry thoroughly.
    CARE AND CLEANING - Step 2

TROUBLESHOOTING GUIDE

Problem Solution
The Burr Grinder display is not illuminated. Your machine might be in stand by mode. Press any button or turn any knob to wake up the machine.
The Burr Grinder does not turn start. Check if the Burr Grinder is securely plugged into a grounded outlet.
If you have a circuit breaker box, make sure the circuit is closed.
If the Burr Grinder shows 3 dashes (---) on display. It indicates the that Top hopper is not locked in place. See product assembly instructions for proper installation.
If the Burr Grinder does not turn on and display shows "Er2". Your Burr Grinder is in a motor overload protection mode. Unplug the Burr Grinder, clean the burrs, reassemble the machine and securely plug into a grounded outlet.
If the Burr Grinder does not turn on and display shows "Er3". Your Burr Grinder is in protection mode. Unplug the Burr Grinder and allow it to cool for 10 minutes before turning it back on.
If Coffee is not coming out from the grind outlet. Ensure fresh coffee beans are in the Top hopper.
If the Burr Grinder is operating normally, but stops abruptly. Stop the Burr Grinder. A coffee bean, may have jammed the burrs. Refer to "Care and Cleaning" section for details on cleaning the burrs.
The automatic dosing quantity is not to your liking. Doses of coffee are programmable refer to the programming section for reference.
If the problem cannot be corrected.

See the "KitchenAid® Warranty and Service" sections.
Do not return the Burr Grinder to the retailer – retailers do not provide service.

NOTE: Any other servicing should be performed by an authorized service representative.

ARRANGING FOR SERVICE AFTER THE WARRANTY EXPIRES, OR ORDERING ACCESSORIES AND REPLACEMENT PARTS

In the United States and Puerto Rico:

For service information, or to order accessories or replacement parts, call toll-free at 1-800-541-6390 or write to:

Customer eXperience Center,
KitchenAid Small Appliances,
P.O. Box 218, St. Joseph, MI 49085-0218

Outside the United States and Puerto Rico:

Consult your local KitchenAid dealer or the store where you purchased the Burr Grinder for information on how to obtain service.

For service information in Canada:

Call toll-free 1-800-807-6777.

For service information in Mexico:

Call toll-free 01-800-0022-767.

PRODUCT SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

warning This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:


You can be killed or seriously injured if you don't immediately follow instructions.


You can be killed or seriously injured if you don't follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFEGUARDS

Before using the electrical appliance, the following basic precautions should always be followed including the following:

  1. Read all instructions.
  2. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
  3. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
  4. Check the Top hopper for the presence of any foreign objects before using.
  5. Do not use outdoors.
  6. To protect against risk of electrical shock, do not put the Coffee Grinder in water or other liquid.
  7. This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they are closely supervised and instructed concerning use of the appliance by a person responsible for their safety. Close supervision is necessary when any appliance is used by or near children. Children should be supervised to ensure that they do not play with the appliance.
  8. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts and before cleaning. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
  9. Avoid contacting moving parts.
  10. Do not let cord hang over edge of table or counter.

SAVE THESE INSTRUCTIONS

This product is designed for household use only.

ELECTRICAL REQUIREMENTS

Voltage: 120 VAC

Frequency: 60 Hz

Wattage: 150 Watts

NOTE: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

Do not modify the plug in any way. Do not use an adapter.

Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or service person to install an outlet near the appliance.

The cord should be arranged so that it will not drape over the countertop or tabletop where it can be pulled on by children or tripped over unintentionally.

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download KitchenAid KCG8433 - Coffee Grinder Manual

Advertisement

Need Assistance?

Do you have a question about the KCG8433 that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents