Download Print this page

Troubleshooting - KitchenAid Pro Line KPCG100 Use & Care Manual

Pro line series burr coffee mill
Hide thumbs

Advertisement

If the mill does not run when
switched
on:
Check to see if the mill is plugged into a grounded 3 prong outlet. If it is, unplug
the mill, then plug it back in again. If the grinder still does not work, check the
fuse or circuit breaker on the electrical circuit the mill is connected to and make
sure the circuit is closed. If the mill does not run after taking these steps, a foreign
object may be jamming the cutting burrs. See "Cleaning the Cutting Burrs" on
page 25 for more information.
If the mill runs when switched
on, but coffee does not grind:
The cutting burrs require cleaning or are worn. See "Cleaning the Cutting Burrs"
on page 25 or "Replacing the Cutting Burrs" on page 29 for more information.
If the mill is operating
normally,
but stops abruptly:
Immediately turn off the grinder. A foreign object, such as a pebble or twig,
may have jammed the cutting burrs. See "Cleaning the Cutting Burrs" on
page 25 for more information.
If the grind is too coarse, or the mill isn't producing
an acceptable
range of grinds:
See "Adjusting the Cutting Burrs" on page 16 or "Replacing the Cutting Burrs"
on page 29 for more information.
If the problem cannot be fixed with the steps above, see the KitchenAid Warranty
and Service section on the following
page.*
*Do not return the coffee mill to the retailer. Retailers do not provide service.

Hide quick links:

Advertisement

loading

  Related Manuals for KitchenAid Pro Line KPCG100