Table of Contents
Advertisement
W&T
2
Assigning the IP address
The Com-Server is factory set to IP address 0.0.0.0. Before you can make
the entry in the Com-Server, you need to specify an IP address that is valid
for your network. Your system administrator will provide you with this. The
IP address must be unique within the network!
.
... using management tool WuTility
.
... using the ARP command
.
... using DHCP protokoll
.
Assigning IP address, subnet mask and gateway address
through the serial port
.
IP Address Conflict Detect
Subject to error and alteration
13
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Com-Server++ and is the answer not in the manual?
Questions and answers