Configuring A Port-Based Ipv6 Multicast Vlan; Configuration Prerequisites; Configuring User Port Attributes - HP FlexFabric 5700 Series Configuration Manual

Step
2. Configure a VLAN as an IPv6
multicast VLAN and enter its
view.
3. Assign the specified VLANs to
the IPv6 multicast VLAN as
sub-VLANs.

Configuring a port-based IPv6 multicast VLAN

To configure a port-based IPv6 multicast VLAN, perform the following steps:
1. Configure a VLAN as an IPv6 multicast VLAN.
2. Configure the attributes for user ports that are connected to the multicast receivers.
3. Assign the user ports to the IPv6 multicast VLAN.
You can assign a port to an IPv6 multicast VLAN only when the port is an Ethernet port or a Layer 2
aggregate interface.

Configuration prerequisites

Before you configure a port-based IPv6 multicast VLAN, complete the following tasks:
• Create VLANs as required.
Enable MLD snooping for the VLAN to be configured as the IPv6 multicast VLAN.
•
Enable MLD snooping for all the VLANs that contain the multicast receivers.
•

Configuring user port attributes

Step
1. Enter system view.
2. Enter interface view.
3. Configure the link type of the
user port as hybrid.
4. Specify the PVID of the current
user port as the VLAN to
which the user port belongs.
Command
ipv6 multicast-vlan vlan-id
subvlan vlan-list
Command
system-view
interface interface-type
interface-number
port link-type hybrid
port hybrid pvid vlan vlan-id
96
Remarks
By default, a VLAN is not an IPv6
multicast VLAN.
By default, an IPv6 multicast VLAN does
not have any sub-VLANs.
Remarks
N/A
N/A
The default setting is access.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.
By default, the PVID for a hybrid
port is VLAN 1.
For more information about this
command, see Layer 2—LAN
Switching Command Reference.