Port-Based Ipv6 Multicast Vlan Configuration Example - HP FlexFabric 5700 Series Configuration Manual

2-4
Port list(0 in total):
# Display IPv6 multicast VLAN forwarding entries on Switch B.
[SwitchB] display ipv6 multicast-vlan group
Total 1 entries.
IPv6 multicast VLAN 10: Total 1 entries.
(::, FF1E::101)
Sub-VLANs (3 in total):
VLAN 2
VLAN 3
VLAN 4
The output shows that the IPv6 multicast VLAN (VLAN 10) contains sub-VLANs VLAN 2 through VLAN 4.
Switch B will replicate the IPv6 multicast data of VLAN 10 to VLAN 2 through VLAN 4.

Port-based IPv6 multicast VLAN configuration example

Network requirements
As shown in
MLDv1 runs on Switch A. MLDv1 snooping runs on Switch B.
•
• Switch A acts as the MLD querier.
The IPv6 multicast source sends IPv6 multicast data to the IPv6 multicast group 224.1.1.1. Host A,
•
Host B, and Host C are receivers. They belong to VLAN 2 through VLAN 4, respectively.
Configure a port-based IPv6 multicast VLAN on Switch B to achieve the following goals:
Switch A sends IPv6 multicast data to Switch B through the IPv6 multicast VLAN.
•
Switch B forwards the IPv6 multicast data to the receivers in different user VLANs.
•
Figure 34 Network diagram
Figure 34:
101