Troubleshooting Pim Snooping; Pim Snooping Does Not Work On A Layer 2 Device - HP FlexFabric 5700 Series Configuration Manual
Ip multicast
Hide thumbs
Also See for FlexFabric 5700 Series:
- Security configuration manual (460 pages) ,
- Configuration manual (185 pages) ,
- Configuration manual (132 pages)
Table of Contents
Advertisement
Troubleshooting PIM snooping
PIM snooping does not work on a Layer 2 device
Symptom
PIM snooping does not work on a Layer 2 device.
Analysis
IGMP snooping or PIM snooping is not enabled.
Solution
To resolve the problem:
1.
Use the display current-configuration command to display information about IGMP snooping and
PIM snooping.
2.
If IGMP snooping is not enabled, enable IGMP snooping globally, and then enable IGMP
snooping and PIM snooping for the VLAN.
3.
If PIM snooping is not enabled, enable PIM snooping for the VLAN.
4.
If the problem persists, contact HP Support.
47
Advertisement
Table of Contents
Troubleshooting
