Pip Source; Pip Size (Pip Window Size); Position X; Position Y - Datavideo SE-500MU Instruction Manual

Border Size
Border Color

3.2.1 PIP Source

In this option, the user will be allowed to assign the PIP source; the available sources are listed as
follows:
• Black
• Input 1
• Input 2
• Input 3
• Input 4
• Background
• Color Bar
Tip: To quickly assign the PIP source, simply press and hold the PIP PGM button and then select a
source from the Program BUS.

3.2.2 PIP Size (PIP Window Size)

The PIP Size parameter ranges from 1 to 100 with 1% being the smallest and 100 being the largest.
Therefore 50% would represent a PIP window which is half the size of the background image. 100%
would see the PIP window totally cover the background image unless offset to one side. To adjust this
parameter, simply move the cursor on the slide bar and the parameter value will be displayed in the
text box next to the slider.

3.2.3 Position X

Adjusting Position X parameter moves the PIP window horizontally. Simply move the Position X slide
bar to adjust the PIP window's horizontal position and the parameter value will be displayed in the
text box next to the slider.

3.2.4 Position Y

Adjusting Position Y parameter moves the PIP window vertically. Simply move the Position Y slide bar
to move the PIP window's vertical position and the parameter value will be displayed in the text box
next to the slider.

3.2.5 Split Source

After the PIP window is activated, clicking the Split button will split the PROGRAM output display into
two with the program out view on the left and the PIP view on the right. The Split source, i.e. the
program out view, can be selected in this option. The available split sources are listed as follows:
Background
Color Bar
OFF
Small
Middle
Large
White
Yellow
Cyan
Green
Magenta
Red
Blue
Black
23
Small
Red