Datavideo SE-500MU Instruction Manual page 13

11. Finally, scroll the Connect tab page back up to the top and select Connect; click the Apply button
to establish the connection between the PC and the SE-500MU. A dialog box displaying the
message of "Connection to machine success" will appear if the connection is successfully
established.
12. Click OK to close the dialog box and on the main screen, the "Connected" status will be displayed
at the bottom right corner, indicating that the SE-500MU is ready for control.
Note: the DVIP settings will be remembered and the PC will automatically connect to the SE-
500MU upon the next start up.
13