Service; Transmitter's Local Serial Port; Security - Black Box AC3000A User Manual

HD VIEW
To update the DDC:
1. Select a Receiver and press Get DDC to read the DDC from the
monitor attached to it and save it to file.
2. Select the Transmitter and press Set DDC to read from the saved
file and upload it to the Transmitter.
Update the DDC information if you add or replace a monitor with a different resolution /
refresh rate.
Get stored DDC button – Press to get the DDC stored in the Transmitter
flash memory and save it as a file on the computer's hard disk. This DDC
data will be read by the player connected to the Transmitter.

7.7.3 Service

To restore factory defaults press Restore to factory settings.
All configuration and tuning adjustments will be lost.

7.7.4 Transmitter's Local Serial port

This is for Serial control of the local monitor. There are 2 options.
·
Enable - Connects the system serial data to the local monitor-
downstream only.
·
Bi directional - Enables serial bi-directional connections with
the local monitor – like any remote monitor in the system.

7.7.5 Security

Choose Tools/Options. In the Preferences window click Security. The
Security screen appears.
38 38
Note!
Note!