HD VIEW
see which ports have devices connected. In Figure 19 a device is
connected to port 4.
3.
To define the units connected to the ports, click the checkbox of
a port or a number of ports that have the same device connected.
4.
Click
5.
Select the device type.
When the device is a Line Splitter, repeat the process of defining the connected devices
for each port of the Line Splitter.
7.3.6 Naming a port
To give a port an identifying name:
1.
Check the port number (ensure that no other ports are checked).
In the manual section, Set device name: appears.
2.
Type a new name for the port - You can give ports identical names.
This name appears immediately on the left.
7.3.7 Saving a topology
To save a topology choose File/Save or Save as. Save the topology.
26
26
Figure 19 Manually displayed topology
. A drop-down menu appears.
Note!