Table of Contents
Advertisement
HD VIEW
Service Utility
installed here
Player - IP: 192.168.111.132
At the player the setup is done as follows:
1.
Connect the Serial Download cable to the Transmitter and
player.
2.
Open the Service Utility and choose Tools/Options, the
Preferences window appears, see Figure 16 above.
3.
Select the Enable Remote Control checkbox, the software starts
a small web server in the background allowing other computers
on the network to access it. The Check Remote Control button
un-grays. Click the button to display a local browser to indicate
that the remote option is enabled and functioning.
4.
To verify the IP address of the player, click Start/Run, type
"CMD" press Enter, type "IPConfig" press Enter. The IP
address appears.
The tuning at the remote laptop/device is done as follows:
1.
Open a browser and type the IP address of the player. For
example in Figure 26 the remote tuner accesses the tuning
facility by typing the IP address http://192.168.111.132.
2.
Press Enter. A list of all Receivers - LR and Line Splitters
connected to the player appears, see Figure 27.
34
34
LAN
Transmitter
Figure 26 Remote tuning
http://192.168.111.132
Remote tuner at the
screen
Receivers
Line Splitter
Advertisement
Table of Contents
