Table of Contents
Advertisement
To restore the topology choose File/Restore. Find the saved topology and
click Open. The stored topology appears.
The most recent saved topologies appear in the File menu.
7.3.8 Saving a Group
You can save a Group to include particular ports. Once defined, you can
send instructions to the defined Group without needing to choose the
individual ports.
To save a Group:
1.
Select the ports you want to include in the Group.
2.
Click
3.
Type a name for the group and click OK. The Group appears on
the left.
Groups appear
here
To see the selected ports of a Group, hold the mouse over the Group
name or folder or check box, a callout appears showing the selected ports.
CHAPTER 7: HD View system management
Note!
. The Enter name box appears.
Figure 20 Saving a Group
27
Advertisement
Table of Contents
