Connecting To The Power Supply - Black Box AC3000A User Manual

HD VIEW
HD View
Transmitter
5VDC
CONTROL 1
Line Splitter
SYSTEM OUT
5VDC
TUNING SYSTEM IN
Receiver side 1
Receiver side 2

5.3.1 Connecting to the power supply

Connect the Transmitter and Line Splitter units to the power supply with
5 VDC, 2.5A from the external power adapters provided. The Receivers
come with 5VDC 1A external power adapters.
Ensure correct polarity (Center negative) and voltage.
Once the system is connected the HD View system broadcasts to all
remote monitors/speakers.
You can use the Service Utility provided to broadcast content to specific monitors or
groups of monitors, see HD View system management on page 21 below
18 18
Serial Download cable
2 3 4 5 6 7 8
CATx cables to
Receivers or
Line Splitters
CATx cable to
Receiver unit
CATx cables to
Receivers
5 VDC SYSTEM
L
SERIAL
Figure 13 Connection diagram
To Audio Out
AUDIO OUT
VIDEO OUT
LOCAL
VIDEO IN
SERIAL AUDIO IN
To Audio In
To
Serial
Stereo Audio cable
port
Serial Extender cable
Video cable
TUNING
L&R R
VIDEO
Note!
To Serial port
To Serial port
To Mic. port
Player
computer
Serial port /
Speakers /
Screen
device
Audio
.