Table of Contents
Advertisement
3.
Select a unit and press Submit. The tuning page appears, see
Figure 28.
4.
Adjust the setting until you have a satisfactory picture. Press
Submit to activate the new values. Press Store to save the new
values. Restore – If after changing values you change your mind,
you can restore the values to how they were the last time the
Store button was pressed by pressing Restore.
5.
Press reset to return to the default values.
CHAPTER 7: HD View system management
Figure 27 Select device web page
Figure 28 Remote tuning web page
35
Advertisement
Table of Contents
