Microscan Visionscape CMGC03 Manual page 54

Chapter 2
System Components
</Device>
<Device name="SoftSys1" devClass="Software" />
</Devices>
<Resources>
<Resource uid="2ca5cfd1-14c2-45dd-b692-9a2948d18361"
type="GigE_Camera" MACAddress="00-06-BE-00-09-4B">
72::National Instruments GigE Vision Adapter - Packet Scheduler
Miniport , DEV=&gt;::MAC-&gt;00-06-BE-00-09-4B::Baumer
Optronic::VISIONSCAPE CMG20</CameraID>
</Resource>
</Resources>
</DMConfiguration>
The vision system step shows this one camera as being available for use.
Everything is as it should be.
Now we are going to shut Visionscape down and change the camera to
another one. This camera is then added to the dm.config list.
<?xml version="1.0" encoding="utf-8"?>
<DMConfiguration xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Settings>
<servicePort>8899</servicePort>
<serviceBase>http://localhost</serviceBase>
<path>DM</path>
<enableLogging>true</enableLogging>
<engineExePath>C:\dev\EngineSolution\EngineProcess\bin\Debug\Vision
scape.EngineProcess.exe</engineExePath>
</Settings>
<Devices>
<Device name="GigEVision1" devClass="GigE">
9a2948d18361" />
2-44
<gige>
<CameraID>TL=&gt;GevTL , INT=&gt;FD::MAC-&gt;00-1B-21-0A-0C-
<IPAddress>192.168.254.2</IPAddress>
<MACAddress>00-06-BE-00-09-4B</MACAddress>
<VendorName>Microscan</VendorName>
<ResolutionX>1624</ResolutionX>
<ResolutionY>618</ResolutionY>
<ModelName>VISIONSCAPE CMG20</ModelName>
</gige>
<Assignments>
<Assignment type="ACQ" uid="2ca5cfd1-14c2-45dd-b692-
Visionscape GigE Camera Guide v4.1, November 2011