Connecting The Sonar Display To The Trolling Motor - MotorGuide Xi3 Wireless Edition Operation, Maintenance & Installation Manual

PRODUCT INSTALLATION, WIRING, AND BATTERY
3. Listen for a multitone beep, which indicates that the receiver has stored
the electronic serial number.
a
e
If you are having trouble syncing your remote, start with the motor unplugged
and deployed. Hold down the left arrow and right arrow buttons at the same
time before you plug in the motor.

Connecting the Sonar Display to the Trolling Motor

NOTE: This procedure applies only to models equipped with integrated sonar.
This sonar display connection procedure applies to trolling motor models with
internal sonar that offer built‑in 200/83 kHz sonar transducers compatible with
Eagle®, Garmin™, Humminbird™, Lowrance™, and Vexilar® brand sonar
displays. For compatibility with other sonar units, refer to www.motorguide.com.
INFORMATION
b
d
16
a -
+ button—increase
speed
b - Propeller button—
propeller on/off
c -
Right arrow button—
steer right
d -
– button—decrease
speed
c
e -
Left arrow button—
steer left
51842
eng