MotorGuide Xi3 Wireless Edition Operation, Maintenance & Installation Manual page 27

TROLLING MOTOR OPERATION
4. Raise the motor out of the water and rotate the transmission so the lower
unit is aligned with the mount cradle. Orient the lower unit so the cable
does not wrap around the trolling motor column. Slide the lower unit into
the mount cradle until the lower unit is fully seated. The mount will lock
the trolling motor in the stowed position. If GPS equipped, it is common to
lose the GPS signal while stowed.
a
a - Lower unit (motor)
b - Transmission
c - Depth collar
d - Curly cable
e - Foot release lever
f - Mount cradle
5. Slide the depth collar so it is tight against the steering transmission.
Rotate the depth collar until it engages the steering transmission, then
tighten the depth collar knob.
a
b
IMPORTANT: Trolling motor can unintentionally deploy if not fully secured.
Ensure the depth collar is fully seated with transmission and the depth collar
knob is tight any time the boat is underway or trailered.
eng
b
f
a - Steering transmission
b - Depth collar
c
c - Depth collar knob
64688
c
64903
21
d
e